PRODUCTS
Products
machine, except for special requirements, 14 or 18 needles are used. The choice is based on the density of the grey fabric.
2. Adjust the tightness of the sleeve line. It can't be too tight or too loose. Make a piece or a piece of film and judge it by hand. Generally, it can be pulled to the required size, and it can rebound after releasing it. It is determined according to the size of the clothes. The check range of the cuff line includes, body, sleeves, shoulders, collars, buttonholes and sleeve buttonholes, all of which are checked, the shoulders are backwards, and the seams of the collar and the shoulders are on the left. (General requirement) If the sleeve line is not tight enough, it needs to be reworked.
3. After adjusting the cuff line to be correct, first keyhole, then fit the big body collar and sleeves. The front and back pieces should be stitched with the ribs aligned and stitched evenly. It is advisable to cover the 2 side edges, especially to the stitching place of the sleeve body. Phenomenon, the narrowing flower must be aligned, the collar must be straight, and the color-changing clothes must be aligned with the color. If the color-changing line on the color-changing side is too long, it is necessary to tie an S knot on the looper.
De-yarn, hook hair, hand sewing:
1. After the production of the sewing machine is completed, the clothes will enter the links of yarn unraveling, hooking and hand sewing. The yarn unraveling parts are divided into sleeves, shoulder joints, collars, chest stickers, back collars and pockets. Pull the waste yarn by hand to remove the waste yarn. The hair can be hooked from the back of the net, as long as all the hairs that can be seen must be hooked up. The more concentrated areas are the shoulders, collars, chest stickers, cuffs, underarms and ribbed hem. The hairs must be evenly hooked. Finally, pull the eye, pay attention to the eye can not be pulled down due to the high needle of the sealing machine, and it needs to be reworked.
2. The place where problems are more likely to occur: the junction of the collar and the shoulder should be checked according to the prenatal requirements. Generally, the seam of the collar should be aligned with the seam of the shoulder or 2 needles behind. The collar should be buried properly. Shoulder joints should be hand-stitched for reinforcement, followed by underarms. Under the armpits, the junction of the front and back pieces and sleeves must be cross-aligned. They must be hand-stitched. (In special cases, hand-stitched reinforcement is required). The above phenomena need to be reworked.
3. After the clothes go through all the above processes without any problems, they will start to wash, order the size label, the washing water label, and the collar strip can be ironed and repaired after it is confirmed to be correct. The label size and clothing size should be checked before packaging. Whether it is consistent, if there is no problem, you can pack it in a box.