OUR SERVICES
Our Services
Precautions for acceptance of PVC floor tiles Inspection Service
Release time:
2022-11-07 16:08
PVC floor tiles Inspection Service manufacturers tell you that PVC floor is a decorative material that is often used in decoration now. We know that after the construction of the house is completed, it needs to be checked and accepted, and it can only be called the real completion after the acceptance is passed. Next, we will introduce the precautions for the acceptance of PVC floor tiles Inspection Service.
1. The plastic panel layer should be made of plastic plate, the plastic plate is welded, and the plastic coil is laid on the cement base with adhesive.
2. The surface layer of the plastic board should be clean, the pattern is clear, the color is consistent, the seams are relatively tight, the patterns match, no glue marks, and the handover requirements with the wall are strict, and the yin and yang corners are square at hand.
3. The choice of adhesive must comply with the national standard "Code for Control of Indoor Environmental Pollution in Civil Construction Engineering" GB50325. Its products should be determined according to the compatibility of the base material and the surface material used and determined through experiments. The varieties, specifications, colors and grades of plastic sheets and coils used for the surface layer of plastic sheets shall comply with the current national standards.
Inspection method: PVC floor tiles Inspection Service manufacturers tell you that you need to observe and inspect the documents of the material qualification certificate and related inspection reports.
4. The welding seam of the plastic plate should be smooth and flat, without coking change points, welding bulges and flaring. The difference of the surface unevenness should not exceed 0.6 mm, and the tensile strength of the welding seam should not be less than 75% of the strength of the plastic plate. Detection method: visual inspection, inspection test report.
5. The bonding between the surface layer and the next layer should be firm, without warping, degumming and overflowing. The manufacturer of PVC floor tiles Inspection Service tells you the inspection method: observation inspection, knocking or inspection with steel ruler.
The above is a brief introduction to the acceptance standards and precautions of PVC floor tiles Inspection Service. Don't be sloppy when checking and accepting, and discovering problems in time will not bring trouble to your future life.
quality PVC floor tiles Inspection Service supplier(s) china